Action Taken When the DTC Sets

P0115

• DTC P0115 is a Type D DTC.
• The transmission will default the engine coolant temperature to 80°C (176°F).

P0120

• DTC P0120 is a Type D DTC.
• The TCM will default Accelerator Position data to 0 percent.
• The transmission will operate in 5th gear in D or M range, 2nd gear in L range.

P0703

• DTC P0703 is a Type D DTC.
• The TCM will default the brake pedal signal to off.

P0727

• DTC P0727 is a Type D DTC.
• The TCM will default engine speed data to 6000 RPM.
• The TCM will limit engine torque to 270 N.m (199 lb ft).
• The transmission will operate in 5th gear in D or M range, 2nd gear in L range.

P0826

• DTC P0826 is a Type D DTC.
• The transmission will disable or inhibit Tap Up/Down mode.

P1779

• DTC P1779 is a Type D DTC.
• The TCM will default driver requested torque data to 300 N.m (221 lb ft).

P2544

• DTC P2544 is a Type D DTC.
• The TCM will increase transmission oil pressure to maximum.
• The TCM will limit the maximum shift speed to 4000 RPM.

P2637

• DTC P2637 is a Type D DTC.
• The TCM will default engine torque data to 300 N.m (221 lb ft).
• The TCM will limit engine torque to 270 N.m (199 lb ft).
• The transmission will operate in 5th gear in D or M range, 2nd gear in L range.