Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0036, P0053, P0054, P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0120, P0121, P0122, P0123, P0128, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P0140, P0141, P0201-P0206, P0220, P0222, P0223, P0300, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0461, P0462, P0463, P0464, P0496, P0506, P0507, P1133, P1516, P2101, P2119, P2120, P2122, P2123, P2125, P2127, P2128, P2135, P2138, P2176, P2A00, P2A01 are not set.
The Loop Status parameter indicates Closed.
The Fuel Trim Learn is enabled.
The engine coolant temperature (ECT) is between -38 and +150°C (-36.4 and +302°F).
The intake air temperature (IAT) is between -38 and +150°C (-36.4 and +302°F).
The manifold absolute pressure (MAP) is between 10-255 kPa.
The vehicle speed is less than 300 km/h (186 mph).
The engine speed is between 400-7,000 RPM.
The mass air flow (MAF) is between 1-510 g/s.
The barometric pressure (BARO) is more than 70 kPa (10.1 psi).
The fuel level is more than 10 percent.
DTC P0171 or P0172 runs continuously when the above conditions have been met.