P0140 - Regular Test
WARNING: This page is about a different variant/trim than selected.
- DTCs P0036, P0054, P0068, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The system voltage is between 10-18 volts.
- The scan tool special functions are not active.
- The Engine Run Time parameter is more than 2 minutes.
- The TP Indicated Angle parameter has changed more than 3 percent at least 1 time.
- The Loop Status parameter is closed.