Hard Start
WARNING: This page is about a different variant/trim than selected.
- Verify that the engine coolant temperature (ECT) has not shifted in value. Refer to Temperature Versus Resistance .
- Verify the engine electrical system for correct operation. Refer to Symptoms - Engine Electrical .
- Verify that the driver is using the correct starting procedure as described in the owners manual.
- Verify that there is adequate fuel.
- Inspect for excessive crankshaft endplay that will cause the crankshaft position (CKP) sensor reluctor wheel to move out of alignment with the CKP sensor. Refer to Crankshaft and Bearing Cleaning and Inspection .