Special Tools

WARNING: This page is about a different variant/trim than selected.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 4972-4 Output Shaft Needle Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 6125-1B Slide Hammer Adapter
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J-08614-A Pinion Flange Holder and Remover
Courtesy of GENERAL MOTORS CORP.	J 23444-A Extreme Press Lubricant - 1/4-Ounce Tube
Courtesy of GENERAL MOTORS CORP.	J 29369-2 Bushing and Bearing Remover - 2-3 in
Courtesy of GENERAL MOTORS CORP.	J 38868 Output Shaft Assembly Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 44809 Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44871 Hub Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44872 Pinion Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J-44873-2 Shoulder Bolts
Courtesy of GENERAL MOTORS CORP.	J 44875 Right Bearing Race Installer
Courtesy of GENERAL MOTORS CORP.	J 44882 Pinion Press Support Bar