Power Take-Off Unit (PTU) Operation

The transfer case PTU in this vehicle consists of an aluminum housing and a ring and pinion power transfer system.

The PTU transfers torque/power to the rear differential via a 2-piece propshaft assembly.

The on-demand rear differential distributes variable torque/power to the rear wheels via individual axle shafts.

The on-demand system operates as follows: the control system of the coupling monitors vehicle conditions, such as vehicle speed and wheel speeds, and commands torque to the rear wheels when depending on these variables. Typical conditions when torque is applied are during vehicle launches, even without wheel slip, and when there is front wheel slippage relative to the rear wheels. The amount of torque depends on the vehicle speed and the amount of wheel slippage. Refer to All-Wheel Drive Description and Operation .