LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Strut Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
  1. Open and support the liftgate.
    2. NOTE: Spring clips should not be removed from the struts.
  2. Lift up and partially remove the spring clips on the strut using a small flat-bladed tool.
    3. Fig 1: View Of Upper End Of Strut Ball Joint
    GM1378629Courtesy of GENERAL MOTORS CORP.
  3. Remove the upper end of the strut from the ball joint.
    4. Fig 2: View Of Lower End Of Strut Ball Joint
    GM1378627Courtesy of GENERAL MOTORS CORP.
  4. Remove the lower end of the strut from the ball joint.
  5. Remove the strut from the liftgate.
scientia non olet · About LEMON Manuals