LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Heater Outlet Hose Replacement (LNJ) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank & Heater Outlet Hose
    GM1327504Courtesy of GENERAL MOTORS CORP.
  1. Install the heater outlet hose to the vehicle. Route the hose into position for attachment to the surge tank.
  2. Install the heater outlet hose clamp to the hose.
  3. Install the heater outlet hose to the surge tank.
  4. Install the surge tank to the vehicle.
    5. CAUTION: Refer to Fastener Caution .
  5. Install the surge tank bolts to the surge tank.

    Tighten:  Tighten the bolts to 8 N.m (71 lb in).

    6. Fig 2: View Of Surge Tank Inlet Hose & Surge Tank
    GM1646806Courtesy of GENERAL MOTORS CORP.
  6. Connect the surge tank inlet hose to the surge tank.
  7. Install the surge tank inlet hose clamp to the surge tank.
    8. Fig 3: View Of Heater Hoses At Engine
    GM1646756Courtesy of GENERAL MOTORS CORP.
  8. Install the heater outlet hose (1) to the engine.
  9. Install the heater outlet hose clamp to the engine.
    10. Fig 4: View Of Heater Hoses At Heater Core
    GM1646757Courtesy of GENERAL MOTORS CORP.
  10. Install the heater outlet hose (1) to the heater core.
  11. Install the heater outlet hose clamp to the heater core.
  12. Fill the engine coolant. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill) or Cooling System Draining and Filling (LNJ GE 47716 Fill) or Cooling System Draining and Filling (LNJ Static Fill) or Cooling System Draining and Filling (LY7 Static Fill) .
scientia non olet · About LEMON Manuals