Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the heater inlet hose (2) to the vehicle.
- Install the heater inlet hose (2) to the engine.
- Install the heater inlet hose clamp to the engine.
- Install the heater inlet hose (2) to the heater core.
- Install the heater inlet hose clamp to the heater core.
- Fill the cooling system. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill) or Cooling System Draining and Filling (LNJ GE 47716 Fill) or Cooling System Draining and Filling (LNJ Static Fill) or Cooling System Draining and Filling (LY7 Static Fill) .