Removal Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
- If equipped with OnStar®, remove the communications interface module. Refer to Communication Interface Module Replacement .
- Disconnect the temperature sensor connector from the temperature sensor.
- Twist the temperature sensor one quarter turn to disengage from the evaporator case assembly.
- Remove the temperature sensor from the evaporator case assembly.