Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the temperature sensor to the evaporator case assembly.
- Twist the temperature sensor one quarter turn to engage to the evaporator case assembly.
- Install the temperature sensor connector to the temperature sensor.
- If removed, install the communications interface module. Refer to Communication Interface Module Replacement .
- Install the left side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .