Transmission Fluid Baffle Installation
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the transmission case fluid passage cover (40).
- Install the 2 - M6 x 1.0 x 14 mm transmission case fluid passage cover bolts (41). Tighten the transmission case fluid passage cover bolts to 5 N.m (44 lb in).
- Install the transmission fluid baffle (44).
- Install the 3 - M6 x 1.0 x 14 mm transmission fluid baffle bolts (45). Tighten the transmission fluid baffle bolts to 5 N.m (44 lb in).
CAUTION:
Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.