Manual Shift Shaft Seal and Bearing Removal: Removal

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Manual Shift Shaft Seal Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the manual shift shaft seal assembly (713) from the transmission case assembly using a small pry bar.

Fig 2: View Of Manual Shift Shaft Bearing

Courtesy of GENERAL MOTORS CORP.

Using J 45161 and a hammer, drive the manual shift shaft bearing (714) through the transmission case assembly bore to remove the bearing. See Special Tools .