LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Automatic Transmission - AF33-5 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Manual Shift Shaft Seal and Bearing Installation >> Installation

Manual Shift Shaft Seal and Bearing Installation: Installation

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Manual Shift Shaft Bearing Installation
    GM783894Courtesy of GENERAL MOTORS CORP.
  1. Using J 45161  and a hammer, install the manual shift shaft bearing (714) into the transmission case assembly until J 45161  is flush with the case bore. See Special Tools .
    2. Fig 2: View Of Manual Shift Shaft Seal Assembly
    GM749463Courtesy of GENERAL MOTORS CORP.
  2. Install the manual shift shaft seal (713) by pressing the seal into the case bore by hand.
scientia non olet · About LEMON Manuals