Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
- Install the new input speed sensor O-ring onto the input speed sensor.
- Install the input speed sensor to the transaxle.
- Install the input speed sensor bolt and tighten to 5 N.m (44 lb in).
- Connect the electrical connector (4) to the input speed sensor.
- Install the battery tray. Refer to Battery Tray Replacement .
CAUTION:
Refer to Fastener Caution
.