Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Align the armrest cover with the hinge positioned correctly.
- Install the screws to the hinge holding the armrest cover to the center console. Tighten the screws to 2 N.m (18 lb in).
- Close the armrest cover. Inspect the cover for proper alignment and operation.
- Return the front seat to the proper position.
CAUTION:
Refer to Fastener Caution
.