LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Engine Mechanical - 3.6L (4 Of 5)) >> Repair Instructions - Off Vehicle (2 Of 3) >> Intake Manifold Assemble >> Upper to Lower Intake Manifold Assemble Procedure

Upper to Lower Intake Manifold Assemble Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Upper-To-Lower Intake Manifold Gaskets
    GM1832134Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not reuse the upper-to-lower intake manifold gasket and the intake manifold-to-cylinder head sealing gaskets.
  1. Install the NEW upper-to-lower intake manifold gaskets.
    2. Fig 2: Identifying Upper Intake Manifold
    GM1832129Courtesy of GENERAL MOTORS CORP.
  2. Install the upper intake manifold to the lower intake manifold.
    3. Fig 3: Identifying Upper-To-Lower Intake Manifold Bolts
    GM1832126Courtesy of GENERAL MOTORS CORP.
  3. Install the upper-to-lower intake manifold bolts and tighten to 23 N.m (17 lb ft).
scientia non olet · About LEMON Manuals