LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Engine Mechanical - 3.6L (4 Of 5)) >> Repair Instructions - Off Vehicle (2 Of 3) >> Crankshaft and Bearing Installation >> Crankshaft Installation Procedure

Crankshaft Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Crankshaft Sprocket Drive Pin
    GM902741Courtesy of GENERAL MOTORS CORP.
  1. If removed, install the crankshaft sprocket drive pin. Lightly tap the pin in place with a small soft face, bronze/plastic, hammer until it bottoms in the keyway.
    2. Fig 2: View Of Crankshaft
    GM902743Courtesy of GENERAL MOTORS CORP.
  2. Gently lower the crankshaft into position in the cylinder block.
scientia non olet · About LEMON Manuals