Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oil pump and oil pump drive shaft.
- Install the oil pump bolt and tighten to 41 N.m (30 lb ft).
- Install the oil pan. Refer to Oil Pan Replacement .
NOTE:
Rotate the oil pump driveshaft as necessary in order to obtain the engagement with the oil pump drive.
CAUTION:
Refer to Fastener Caution
.