Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold Studs

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

If the injector sight shield studs were removed, install the studs to the intake manifold and tighten to 10 N.m (89 lb in).

Fig 2: Identifying Injector Sight Shield

Courtesy of GENERAL MOTORS CORP.

Install the injector sight shield to the studs.

Fig 3: Identifying Oil Filler Tube, Oil Cap & EGR Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the EGR electrical connector (3).
Install the oil filler tube (2) and the oil cap (1).