Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Position the engine mount bracket to the engine.
- Install the engine mount bracket to engine bolts (1-4).
- Tighten the bolts in locations (1) and (2) to 27 N.m (20 lb ft).
- Tighten the bolts in locations (3) and (4) to 55 N.m (41 lb ft).
- Install the right engine mount. Refer to Engine Mount Replacement - Right Side .
CAUTION:
Refer to Fastener Caution
.