LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Engine Mechanical - 3.4L) >> Repair Instructions - Off Vehicle >> Valve Rocker Arm and Push Rod Removal

Valve Rocker Arm and Push Rod Removal

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Valve Rocker Arm Bolts
    GM1451471Courtesy of GENERAL MOTORS CORP.
  1. Loosen the valve rocker arm bolts.
    2. IMPORTANT: Place the valve train components in a rack in order to ensure that the components are installed in the same location from which they where removed.
  2. Remove the valve rocker arms.
    3. Fig 2: View Of Push Rods
    GM909602Courtesy of GENERAL MOTORS CORP.
  3. Remove the push rods.
    • The intake push rods measure 144.18 mm (5.68 in).
    • The exhaust push rods measure 152.51 mm (6.0 in).
    4. Fig 3: View Of Intake Manifold Gaskets
    GM909605Courtesy of GENERAL MOTORS CORP.
  4. Remove the intake manifold gaskets.
scientia non olet · About LEMON Manuals