Exhaust Manifold Installation - Right Side
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust manifold studs and tighten to 18 N.m (13 lb ft).
- Install the exhaust manifold gasket.
- Install the exhaust manifold.
- Install the exhaust manifold nuts and tighten to 16 N.m (12 lb ft).
- Install the right side spark plugs and tighten to 15 N.m (11 lb ft).
- Install the spark plug wires onto the spark plugs.
- Install the lower exhaust manifold heat shield.
- Install the upper exhaust manifold heat shield.
- Install the exhaust manifold heat shield bolts and tighten to 10 N.m (89 lb in).
- Coat the threads of the heated oxygen sensor with anti seize compound. Tighten the heated oxygen sensor to 42 N.m (31 lb ft).
- Install the heated oxygen sensor.
- Install the spark plug wires.
CAUTION:
Refer to Fastener Caution
.