Exhaust Manifold Installation - Left Side
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust manifold studs and tighten to 18 N.m (13 lb ft).
- Install the exhaust manifold gasket.
- Install the exhaust manifold.
- Install the exhaust manifold nuts in sequence and tighten to 16 N.m (12 lb ft).
- Install the left side spark plugs and tighten to 15 N.m (11 lb ft).
- Install the spark plug wires to the spark plugs.
- Install the exhaust manifold heat shield.
- Install the exhaust manifold heat shield bolts and tighten to 10 N.m (89 lb in).
- Install the exhaust gas recirculation (EGR) valve gasket (615) and the EGR assembly (612, 614) to the upper intake manifold.
- Install the EGR valve bolts (616) and tighten to 30 N.m (22 lb ft).
- Install the EGR pipe gasket (610) and pipe (612) to the left exhaust manifold.
- Install the EGR pipe bolts (616) and tighten to 30 N.m (22 lb ft).
CAUTION:
Refer to Fastener Caution
.