Repair Verification
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the nitrogen/smoke valve to nitrogen.
- Command the EVAP vent valve closed with a scan tool.
- Use the remote switch to activate the J 41413-200 . See Special Tools .
- Use the remote switch to introduce nitrogen and fill the EVAP system until the floating indicator stabilizes.
- Verify the flow meter's stable floating indicator position is even with the red flag.
- Disconnect the nitrogen/smoke supply, remove the CH-48096 or GE-41415-50 , and connect the purge line to the EVAP purge solenoid or install the fuel fill cap.
- Clear the DTCs with a scan tool.