Component Testing
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Seal the EVAP system using the EVAP Purge/Seal function with a scan tool.
- Pressurize the EVAP system to 9.33 mm/Hg (5 in/H20).
- Compare the scan tool FTP sensor parameter to the J 41413-200 pressure/vacuum gage. See Special Tools . The scan tool FTP sensor parameter should be within 1.86 mm/Hg (1 in/H20) of the pressure/vacuum gage.
- Command the EVAP vent valve open with a scan tool.
- The scan tool FTP parameter should be 0 mm/Hg (0 in/H20).
- If not within the specified range, replace the FTP sensor.