Circuit/System Testing
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel fill cap. Connect the GE-41415-50 to the fuel tank filler neck. Connect the J 41413-200 to the GE-41415-50 . See Special Tools .
- Seal the system using the Purge Seal function with a scan tool.
- Pressurize the EVAP system with nitrogen to 9.33 mm/Hg (5 in. H2O). Compare the scan tool Fuel Tank Pressure Sensor parameter to the J 41413-200
pressure/vacuum gage. See Special Tools
. Verify the FTP sensor parameter is within +/-0.9 mmHg (+/-0.5 in.H2O) of the pressure/vacuum gage.
- If not within the specified range, replace the FTP sensor.
- Command the EVAP vent solenoid valve OPEN with a scan tool. Verify the scan tool FTP sensor parameter is -0.9 to +0.9 mmHg (-0.5 to +0.5 in.H2O).
- If not within the specified range, replace the FTP sensor.