Component Testing
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the EVAP purge solenoid. Test for 15-20 Ω of resistance between the terminals of the EVAP purge solenoid.
- If not within the specified range, replace the EVAP purge solenoid.
- Measure the resistance between each terminal of the EVAP purge solenoid and the EVAP purge solenoid housing. The DMM should display O.L.
- If less than the specified value, replace the EVAP purge solenoid.