Component Testing
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Measure for 7-12 Ω between the terminals of the CMP actuator solenoid.
- If not within the specified range, replace the CMP actuator solenoid.
- Measure the resistance between each terminal of the CMP actuator solenoid and the CMP actuator solenoid housing. The DMM should display OL.
- If less than the specified value, replace the CMP actuator solenoid valve.