LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Automatic Transmission - AF33-5 - Introduction) >> Specifications >> Transmission Clearance Specifications

Transmission Clearance Specifications

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Transmission Clearance Specifications

Application Specification
Metric English
Front Differential Assembly (13)
  • Unloaded Rotating Torque
 0.70-1.20 N.m 6-11 lb in
Fluid Pump Assembly (2)
  • Driven Gear (204) to Body Clearance
 0.075-0.20 mm 0.002-0.007 in
  • Drive Gear (205) Tip to Body Clearance
 0.013-0.342 mm 0.0005-0.014 in
  • Driven Gear (204) Tip to Body Clearance
 0.004-0.298 mm 0.0001-0.018 in
  • Fluid Pump Body Bushing, ID
 38.113-38.188 mm 1.500-1.503 in
  • Side Clearance of Drive and Driven Gear to Body
 0.03-0.10 mm 0.0012-0.004 in
  • Stator Shaft Bushing, ID
 22.201-22.257 mm 0.874-0.876 in
Front Carrier Sun Gear Assembly (24)
  • Front Carrier Bushing, ID
 30.056-30.132 mm 1.183-1.186 in
  • Front Sun Gear Bushing, ID
 22.200-22.276 mm 0.874-0.877 in
  • Rear Sun Gear Bushing, ID
 22.200-22.276 mm 0.874-0.877 in
2nd Coast Clutch and 2nd Clutch Hub and 2nd Clutch Sprag Assembly (11) to Fluid Pump
  • Installed Height
 51.09-51.71 mm 2.011-2.036 in
Forward and Direct Clutch Assembly (23) End Play
  • Installed End Play
 0.188-0.570 mm 0.007-0.022 in
Forward and Direct Clutch Assembly (23) to Transmission Case (17)
  • Installed Height
 50.850-51.825 mm 2.002-2.040 in
Front Differential Gear Thrust Bearing (263) to case (17)
Installed Height 0.05-0.20 mm 0.002-0.008 in
3rd Gear Band Servo (57) Return Springs
  • Outer Spring
  • Free/Relaxed Length
 40.2 mm 1.582 in
  • Outer Diameter
 20.3 mm 0.800 in
  • Inner Spring - yellow
  • Free/Relaxed Length
 13.5 mm 0.531 in
  • Outer Diameter
 10.0 mm 0.394 in
3rd Gear Band Servo (57)
  • Piston Bore Stroke
 5.76-6.76 mm 0.227-0.266 in
Transmission Housing - Torque Converter Distance
  • Torque Converter mounting lug/pad minimum installed distance to Transmission Housing outer edge
 11.35 mm 0.447 in
Clutch Assembly Specifications

Application Specification
Metric English
Direct Clutch (562)
  • Piston Bore Stroke
 1.49-1.91 mm 0.059-0.075 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.76-1.24 mm 0.030-0.049 in
  • Available Direct Clutch Backing Plate (555) Thickness
 4.0 mm 0.157 in
4.2 mm 0.165 in
4.4 mm 0.173 in
Forward Clutch (565)
  • Piston Bore Stroke
 0.71-1.09 mm 0.028-0.042 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.74-1.06 mm 0.029-0.042 in
  • Available Forward Clutch Backing Plate (551) Thickness
 5.0 mm 0.197 in
5.2 mm 0.205 in
5.4 mm 0.213 in
Low and Reverse Clutch (27)
  • Piston Bore Stroke
 1.39-2.21 mm 0.054-0.087 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.43-1.43 mm 0.017-0.056 in
1-2 Reverse Clutch (603)
  • Piston Bore Stroke
 2.34-2.70 mm 0.092-0.106 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.84-1.63 mm 0.033-0.064 in
  • Available 1-2 Reverse Clutch Backing Plate (621) Thickness
 5.0 mm 0.197 in
5.1 mm 0.201 in
5.2 mm 0.205 in
5.3 mm 0.209 in
5.5 mm 0.216 in
Second Clutch (210)
  • Piston Bore Stroke
 1.10-1.50 mm 0.043-0.059 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.44-1.04 mm 0.0173-0.040 in
  • Available 2nd Clutch Backing Plate (219) Thickness
 3.6 mm 0.142 in
3.8 mm 0.150 in
4.0 mm 0.157 in
Second Coast Clutch (222)
  • Piston Bore Stroke
 1.24-1.96 mm 0.049-0.077 in
  • Relaxed Clutch Pack Stack Up Clearance
 0.53-1.59 mm 0.021-0.063 in
4-5 Clutch (582)
  • 4-5 Clutch Housing Bushing, ID
 36.125-36.200 mm 1.422-1.425 in
  • 4-5 Clutch Piston Stroke
 1.52-1.90 mm 0.060-0.075 in
Relaxed Clutch Pack Stack Up Clearance 0.60-1.36 mm 0.024-0.054 in
Available 4-5 Clutch Backing Plate (567) Thickness 3.6 mm 0.142 in
3.8 mm 0.150 in
4.0 mm 0.158 in
scientia non olet · About LEMON Manuals