LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Transfer Case - NVG 900) >> Repair Instructions - On Vehicle >> Transfer Case Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right hand axle. Refer to Front Wheel Drive Shaft Replacement .
    3. Fig 1: View Of Crankshaft Position Sensor & Knock Sensor Electrical Connectors
    GM1371165Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors from the crankshaft position sensor (2) and the knock sensor (1).
    4. Fig 2: View Of Transfer Case Mounting Bracket
    GM928962Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the transfer case mounting bracket and engine.
  5. Remove the bracket.
scientia non olet · About LEMON Manuals