Removal Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
- Remove the communication interface module, if equipped. Refer to Communication Interface Module Replacement .
- Disconnect the electrical connector from the mode actuator.
- Remove the mode actuator screws from the evaporator case assembly.
- Remove the mode actuator from the evaporator case assembly.