Removal Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Disconnect the HO2S 2 harness connector (3).
- Use a liquid penetrate before removing the sensor.
- Remove the HO2S 2 (2) from the exhaust pipe.
NOTE:
Silicone based products will contaminate the HO2S. DO NOT use products containing silicone on or near the HO2S.