Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the EGR valve (1) with a new gasket to the intake manifold.
- Install the EGR valve bolts (2).
Tighten: Tighten the bolts to 30 N.m (22 lb ft).
- Connect the EGR valve electrical connector.
- Install the EGR pipe (4). Refer to Exhaust Gas Recirculation Pipe Replacement .
CAUTION:
Refer to Fastener Caution
.