LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank
    GM1646808Courtesy of GENERAL MOTORS CORP.
  1. Install the heater outlet hose to the surge tank.
  2. Install the surge tank to the vehicle.
  3. CAUTION: Refer to Fastener Caution .
  4. Install the surge tank bolts to the surge tank and tighten the bolts to 9 N.m (80 lb in).
  5. Fig 2: View Of Surge Tank Inlet Hose & Surge Tank
    GM1646806Courtesy of GENERAL MOTORS CORP.
  6. Connect the surge tank inlet hose to the surge tank.
  7. Install the surge tank inlet hose clamp to the surge tank.
  8. Fill the engine coolant. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill)  or Cooling System Draining and Filling (LNJ GE 47716 Fill)  or Cooling System Draining and Filling (LNJ Static Fill)  or Cooling System Draining and Filling (LY7 Static Fill) .