Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Radiator Inlet Hose At Engine

Courtesy of GENERAL MOTORS CORP.

Install the radiator inlet hose to the engine.
Install the radiator inlet hose clamp to the engine.

Fig 2: View Of Radiator Inlet Hose At Radiator

Courtesy of GENERAL MOTORS CORP.

Install the radiator inlet hose to the radiator.
Install the radiator inlet hose clamp to the radiator.

Fig 3: View Of UHFB, Housing, Connectors & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the battery box vent tube to the side of the battery box.

Fig 4: View Of Battery Box Cover

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the battery box cover (1) and tighten the screws to 2 N.m (18 lb in).

Fig 5: View Of PCM, Bracket & Wire Harness

Courtesy of GENERAL MOTORS CORP.

Install the PCM bracket with PCM (1) to the top of the battery box cover.
Install the PCM wire harness (2) to the battery box cover.
Fill the cooling system. Refer to Cooling System Draining and Filling (LY7 GE 47716 Fill) or Cooling System Draining and Filling (LNJ GE 47716 Fill) or Cooling System Draining and Filling (LNJ Static Fill) or Cooling System Draining and Filling (LY7 Static Fill) .