LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Scribe Mark On Fan Hub & Motor Shaft
    GM1284988Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan and shroud from the vehicle. Refer to Cooling Fan and Shroud Replacement .
    2. NOTE: The fan and motor assembly is a balanced assembly. Be sure to mark the relationship of the fan to the motor shaft to ensure the balance is maintained.
  2. Place a scribe mark (3) on the fan (2) hub and the motor shaft (1).
    3. Fig 2: View Of Fan Retaining Clip From The Motor Shaft
    GM1284989Courtesy of GENERAL MOTORS CORP.
  3. Remove the fan retaining clip (1) from the motor shaft (2).
  4. Discard fan retaining clip (1).
    5. Fig 3: View Of Fan From The Motor
    GM1284991Courtesy of GENERAL MOTORS CORP.
  5. Remove the fan (1) from the motor (2).
    6. Fig 4: View Of Fan Motor Screws From The Fan Shroud
    GM1284993Courtesy of GENERAL MOTORS CORP.
  6. Remove the fan motor screws from the fan shroud.
  7. Remove the fan motor from the fan shroud.
scientia non olet · About LEMON Manuals