LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Air Bleed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Coolant Air Bleed Pipe Bolts
    GM1847144Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the surge tank inlet hose. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (LNJ)  or Radiator Surge Tank Inlet Hose/Pipe Replacement (LY7) .
  3. Reposition the coolant air bleed hose clamp (1) at the coolant air bleed hose.
  4. Remove the coolant air bleed pipe from the coolant air bleed hose (2).
  5. Remove the coolant air bleed pipe bolts (3) from the upper intake manifold.
  6. Remove the coolant air bleed pipe from the engine.
scientia non olet · About LEMON Manuals