Underhood Electrical Center or Junction Block Bracket Replacement
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the underhood electrical center or junction block. Refer to Underhood Electrical Center or Junction Block Replacement . |
|
| 1 | Underhood Electrical Center or Junction Block Bracket Bolt
CAUTION:
Refer to Fastener Caution
. Procedure: Remove the electrical connector inside the block before removing the bracket. Tighten: 20 N.m (15 lb ft) |
| 2 | Underhood Electrical Center or Junction Block Bracket |