Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Position the exhaust system (4) to the vehicle and install the rubber isolators (5, 6, 7) to the hangers (1, 2, 3).
- Install the new gasket onto the catalytic converter pipe flange.
- Assemble the exhaust system pipe to the catalytic converter pipe and install new nuts. Tighten the nuts to 37 N.m (27 lb ft).
- Check the entire exhaust system for leaks.
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution
.