Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- With the aid of an assistant, install the muffler assembly (3) to catalytic converter (1) and the vehicle.
- With the aid of an assistant, install the rubber insulators (5, 6, and 7) to the exhaust pipe hangers (1, 2, and 3).
- Install a NEW catalytic converter to muffler gasket onto the studs.
- Install the catalytic converter pipe flange to muffler pipe flange nuts and tighten to 37 N.m (27 lb ft).
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution
.