Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Crossover Pipe, Studs & Nuts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install any previously removed exhaust manifold studs (1) and tighten to 25 N.m (18 lb ft).
Install the exhaust crossover pipe (3).

NOTE: Maintain approximately 6.35 mm (0.25 in) between the thermostat housing and the exhaust crossover pipe.

Install the exhaust crossover pipe nuts (2) and tighten to 25 N.m (18 lb ft).
Install the battery box. Refer to Battery Box Replacement .