LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Engine Mechanical - 3.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Engine Mount Bracket Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Lower Engine Mount Bolts
    GM1827873Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the engine mount (3) and the lower bracket (4) to the vehicle. Tighten the lower bracket bolts to 50 N.m (37 lb ft).
  2. Install the ABS connector clip to the frame.
  3. Install the upper engine mount bracket nuts (1) and tighten to 50 N.m (37 lb ft).
    4. Fig 2: Identifying Engine Mount Bracket & Bolts
    GM1827876Courtesy of GENERAL MOTORS CORP.
  4. Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
    5. Fig 3: Identifying Right Side Engine Mount
    GM1827856Courtesy of GENERAL MOTORS CORP.
  5. Tighten the right upper engine mount bracket bolt (2) to 50 N.m (37 lb ft).
  6. Install the upper engine mount bracket bolts (1) and tighten to 110 N.m (81 lb ft).
  7. Lower the vehicle.
  8. Remove the engine support. Refer to Engine Support Fixture .
  9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals