LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Engine Mechanical - 3.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Drive Belt & Generator Pulley
    GM1897242Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine splash shield.
  2. Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
  3. Completely remove the lower engine mount bracket bolt.
  4. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  5. Slide the drive belt off of the generator pulley (1).
  6. Slowly release the drive belt tensioner.
  7. Remove the drive belt from the accessory drive pulleys.
scientia non olet · About LEMON Manuals