LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Engine Mechanical - 3.6L (2 Of 5)) >> Repair Instructions - On Vehicle (1 Of 2) >> Drive Belt Idler Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Electrical Connector
    GM1827002Courtesy of GENERAL MOTORS CORP.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Completely loosen the idler pulley bolt.
  3. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  4. Disconnect the generator electrical connector (1).
    5. Fig 2: View Of Battery Cable Boot
    GM1827004Courtesy of GENERAL MOTORS CORP.
  5. Reposition the battery cable boot then disconnect the battery cable from the generator.
  6. Remove the generator bolts and position generator aside.
    7. Fig 3: Identifying Drive Belt Idler Pulley
    GM1826824Courtesy of GENERAL MOTORS CORP.
  7. Remove the drive belt idler pulley.
scientia non olet · About LEMON Manuals