Stabilizer Shaft Link Replacement

WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Stabilizer Shaft Link

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
1	Stabilizer Shaft Link Ball Stud Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tip: Use the proper size Allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut. Tighten: 85 N.m (63 lb ft).
2	Stabilizer Shaft Link

Callout

Component Name

Preliminary Procedures

Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .

Stabilizer Shaft Link Ball Stud Nut (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tip: Use the proper size Allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut.

Tighten: 85 N.m (63 lb ft).

Stabilizer Shaft Link