Front Bumper Fascia Support Replacement

Fig 1: View Of Front Bumper Fascia Support

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Equinox)  or Front Bumper Fascia Replacement (Torrent) .
1	Plastic Push Pin Retainers (Qty: 4)
2	Fascia Support Screws (Qty: 4) NOTE: Refer to Fastener Notice . Tighten:  2 N.m (18 lb in)
3	Front Bumper Fascia Support