Instrument Cluster Replacement

Fig 1: View Of Instrument Cluster

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable the SIR. Refer to SIR Disabling and Enabling . Tilt the steering column to the lowest setting.
1	Instrument Panel (I/P) Cluster Trim Plate Refer to Instrument Cluster Trim Panel Replacement .
2	I/P Cluster Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2.5 N.m (22 lb in)
3	I/P Cluster Procedure: If a replacement I/P cluster is installed, program the cluster. Refer to Control Module References .