Lock Pillar Upper Garnish Molding Replacement

Fig 1: View Of Lock Pillar Upper Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement . Remove the outboard rear seat shoulder belt guide. Refer to Rear Seat Belt Replacement .
1	Quarter Window Trim Finish Panel Bolt NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Quarter Window Trim Finish Panel

Callout

Component Name

Preliminary Procedures

Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
Remove the outboard rear seat shoulder belt guide. Refer to Rear Seat Belt Replacement .

Quarter Window Trim Finish Panel Bolt

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Quarter Window Trim Finish Panel