Backup Lamp Replacement (Sky)

Fig 1: View Of Backup Lamp Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Sky) or Rear Bumper Fascia Replacement (Solstice) . Remove the 2 lower back up lamp screws from the rear bumper valance center panel.
1	Back Up Lamp Assembly Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Back Up Lamp Assembly Tip: Replace the lamp bulb, if needed.

Callout

Component Name

Preliminary Procedures

Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Sky) or Rear Bumper Fascia Replacement (Solstice) .
Remove the 2 lower back up lamp screws from the rear bumper valance center panel.

Back Up Lamp Assembly Screw (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Back Up Lamp Assembly
Tip: Replace the lamp bulb, if needed.